TM 5-3805-261-23-1
BLACKOUT AND SERVICE STOPLIGHT SWITCHES REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Equipment Conditions
Machine parked on level ground (TM 5-3805-261-
Unit
10)
Tools and Special Tools
Parking/emergency brake applied (TM 5-3805-261-
Tool kit, general mechanic's (Item 89, WP 0348 00)
10)
Implements lowered to ground (TM 5-3805-261-
Materials/Parts
10)
Rag, wiping (Item 35, WP 0349 00)
Engine off (TM 5-3805-261-10)
References
Air pressure relieved (TM 5-3805-261-10)
Battery cables disconnected (WP 0125 00)
REMOVAL
NOTE
This procedure covers replacement of the service stoplight switch. Follow these instructions for the
blackout stoplight switch.
Tag wire assemblies before disconnecting to aid in installation.
1.
Remove two nuts (7) and washers (6) and disconnect two wire assemblies (5) from under right side of cab.
2.
Remove service stoplight switch (4), bushing (3) and elbow (2) from brake control valve (1).
1
2
3
4
5
6
7
397-349
