TM 5-3805-261-23-1
HYDRAULIC OIL TEMPERATURE SWITCH REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
References
WP 00021 00
Unit
Equipment Conditions
Tools and Special Tools
Machine parked on level ground (TM 5-3805-261-
Tool kit, general mechanic's (Item 89, WP 0348 00)
10)
Shop equipment, common no. 1 (Item 75, WP 0348
Parking/emergency brake applied (TM 5-3805-261-
10)
Materials/Parts
Implements lowered to ground (TM 5-3805-261-
Cap set, protective (Item 7, WP 0349 00)
10)
Rag, wiping (Item 35, WP 0349 00)
Engine off (TM 5-3805-261-10)
Tag, marker (Item 44, WP 0349 00)
Battery cables disconnected (WP 0125 00)
Hydraulic oil drained (WP 0216 00)
Packing, preformed
WARNING
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning may cause
injury to personnel.
CAUTION
Wipe area clean around hydraulic oil temperature switch during removal. Plug opening after removing
switch. Contamination of hydraulic system could result in premature failure.
NOTE
Use container to catch any hydraulic oil that may drain from system. Dispose of oil in accordance with local
policy and ordinances. Ensure all spills are cleaned up.
