TM 5-3805-261-23-1
HYDRAULIC OIL TEMPERATURE SWITCH REPLACEMENT - CONTINUED
0116 00
INSTALLATION
1.
Install new preformed packing (2) and switch (3) on hydraulic tank (1).
2.
Connect two wire assemblies (4) and install two washers (5) and screws (6).
3.
Fill hydraulic tank (WP 0216 00).
4.
Connect battery cables (WP 0125 00).
5.
Turn battery disconnect switch to ON position and start engine (TM 5-3805-261-10).
6.
Check for leaks. Stop engine.
7.
Check hydraulic oil level. Refill hydraulic tank as required (WP 0216 00).
END OF WORK PACKAGE
0116 00-3
