TM 5-3805-261-23-1
HYDRAULIC OIL TEMPERATURE SWITCH REPLACEMENT - CONTINUED
0116 00
REMOVAL
NOTE
Tag wire assemblies before disconnecting to aid in installation.
1.
Remove two screws (6) and washers (5) and disconnect two wire assemblies (4) from switch (3) on right side of hydrau-
lic tank (1).
CAUTION
Plug open port to prevent contamination.
2.
Remove switch (3) and preformed packing (2) from hydraulic tank (1). Discard preformed packing.
1
1
2 3
4
5
6
397-348
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
0116 00-2
