TM 5-3805-261-23-1
FUEL PRESSURE SWITCH REPLACEMENT - CONTINUED
0115 00
REMOVAL
NOTE
On models 130GS and 130GNS, the switch is mounted on the fuel injector pump.
Tag wire assemblies before disconnecting to aid in installation.
1.
Disconnect two wire assemblies (1) from two sockets (2).
2.
Remove two sockets (2) and plug (3) from switch (4).
CAUTION
Plug open port to prevent contamination.
3.
Remove switch (4) from elbow (5) on secondary fuel filter (6).
5
4
6
3
2
1
397-347
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
0115 00-2
