TM 5-3805-261-23-1
SUPPLEMENTAL STEERING MAGNETIC SWITCH REPLACEMENT - CONTINUED
0090 00
REMOVAL
NOTE
Tag wire assemblies before disconnecting to aid in installation.
1.
Remove two nuts (6), lockwashers (5), and washers (7) and disconnect three wire assemblies (8) from switch (11). Dis-
card lockwashers.
2.
Remove two nuts (2) and lockwashers (3) and disconnect two wire assemblies (4) from switch (11). Discard lockwash-
ers.
3.
Remove four nuts (9), washers (10), bolts (1), and switch (11).
4
3
2
2
6
1
3
5
11
4
7
8
8
7
10
6 5
9
397-270
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
INSTALLATION
1.
Install switch (11), four bolts (1), washers (10), and nuts (9).
2.
Connect two wire assemblies (4) and install two new lockwashers (3) and nuts (2) on switch (11).
3.
Connect three wire assemblies (8) and install two washers (7), new lockwashers (5), and nuts (6) on switch (11).
4.
Close right side engine doors (TM 5-3805-261-10).
5.
END OF WORK PACKAGE
0090 00-2