TM 5-3805-261-23-1
MISCELLANEOUS TROUBLESHOOTING PROCEDURES - CONTINUED
0013 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3.
Test continuity of main wiring
Repair main wiring harness as necessary
7.
All Windshield Wipers and
harness at rear wiper motor. Refer to
Washers Fail to Operate
Electrical System Troubleshooting
(CCE Machine) - Continued.
1.
Check windshield wiper fuse (4A).
If fuse is blown, replace (WP 0097 00). If
8.
One or More Windshield
Wipers Fail to Operate (CCE
the problem still exists, go to Test 2.
Machine).
2.
Check individual wiper motors.
If wiper motor is damaged or defective,
replace (WP 0206 00, WP 0207 00, or WP
Test 3.
3.
Test continuity of windshield wiper
If windshield wiper switch is damaged or
switch. Refer to Electrical System
defective, replace (WP 0085 00). If the
problem still exists, go to Test 4.
4.
Test continuity of main harness
Repair main harness as necessary (WP
between fuse block and windshield
wiper switch and between
windshield wiper switch and
windshield wiper motor. Refer to
Electrical System Troubleshooting
1.
Check windshield washer motor.
If windshield washer motor is damaged or
9.
Windshield Washer Fails to
Operate (CCE Machine).
defective, replace (WP 0209 00). If the
problem still exists, go to Test 2.
2.
Test continuity of main harness
Repair main harness as necessary (WP
between windshield wiper switch
and windshield washer. Refer to
Electrical System Troubleshooting
1.
Check main circuit breaker (60A).
Reset circuit breaker. If the problem still
10. Front or Rear Window
Defroster Does Not Operate
exists, go to Test 2.
(CCE Machine).
2.
Check defroster fuse (10A).
If fuse is blown, replace (WP 0097 00). If
the problem still exists, go to Test 3.
3.
Check defroster motor.
If defroster motor is damaged or
defective, replace (WP 0210 00). If the
problem still exists, go to Test 4.
4.
Test continuity of defroster switch.
If the problem still exists, go to Test 5.
Refer to Electrical System
