TM 5-3805-261-20
BODY, CHASSIS AND HULL ACCESSORY ITEMS MAINTENANCE. (cont)
14-9.
Heater. (Sheet 4 of 7)
DISASSEMBLY (cont)
12.
Remove washer (25), cap (26), screw (27)
and brush (28) from motor (29, Figure 14-
23).
13.
Disconnect wire assembly (35) at terminal
from resistor (32).
14.
Remove bolt (30), clip (31) and resistor
(32).
15.
Disconnect two wire assemblies (33) at
terminals from connector (34).
16.
Remove connector (34).
17.
Disconnect wire assemblies (35 and 36) at
connectors.
18.
Remove wire assembly (35).
19.
Disconnect two wire assemblies (37 and 38,
Figure 14-24) at connectors.
20.
Remove two nuts (39) and switches (40).
21.
Remove nut (41).
22.
Disconnect cable assembly (42).
23.
Remove knob (43).
24. Remove bracket assembly (44) from heater
assembly (8).
23.
Remove four nuts (45) and bracket (46)
from bracket assembly (44).
Figure 14-23.
Figure 14-24.
Go to Sheet 5
14-36
