TM 5-3805-261-20
BODY, CHASSIS AND HULL ACCESSORY ITEMS MAINTENANCE.
14-10.
Inside Rearview Mirror. (Sheet 2 of 2)
REMOVAL
1.
Remove two caps (1, Figure 14-25) from
top, front of cab.
2.
Remove two bolts (2), lockwashers (3 and
4), nuts (5) and mirror (6).
3.
Remove four bolts (7) and washers (8,
Figure 14-26).
4.
Remove two plugs (9), clamps (10) and
arms (11).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install two arms (11) and clamps (10,
Figure 14-26).
2.
Install two plugs (9), four washers (8) and
bolts (7).
3.
Install mirror (6, Figure 14-25).
4.
Install two nuts (5), lockwashers (4 and 3),
bolts (2) and caps (1).
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 14-25.
Figure 14-26.
End of Task
14-41