TM 5-3805-261-20
BODY, CHASSIS AND HULL ACCESSORY ITEMS MAINTENANCE.
14-5.
Front Wiper (Upper). (Sheet 4 of 5)
ASSEMBLY
1.
Position motor (30) and bracket (27). Insert
motor (30) shaft through bracket (27, Figure
14-9).
2.
Install two screws (21) and tighten to 51 lb-
in torque.
3.
Install three washers (29) and bolts (28).
Tighten three bolts (28) to 43 lb-in torque.
4.
Install shaft assembly (26), crank assembly
(25), link assembly (24), two washers (23),
clips (22) and position on bracket (27).
5.
Install lockwasher (19) and nut (18) on
motor (30) shaft. Tighten nut (18) to 10 ft-lb
torque.
Go to Sheet 5
14-17
