TM 5-3805-261-20
BODY, CHASSIS AND HULL ACCESSORY ITEMS MAINTENANCE.
14-6.
Rear Wiper. (Sheet 3 of 4)
REMOVAL
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
10.
Disconnect wire assembly (14) and three
wire assemblies (15) from switch (16).
11.
Remove switch (16) and nut (17).
12.
Remove screws (18 and 19), two brackets
(20) and motor (21, Figure 14-13).
NOTE
Note location of nut on shaft of motor
to aid in installation.
13.
Remove washer (22) and nut (23) from
shaft of motor (21).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install nut (23) and washer (22) on shaft of
motor (21, Figure 14-13) in upper rear,
interior of cab.
Figure 14-13.
Go to Sheet 4
14-21
