INSTALLATION - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
860

TM 5-3805-261-20 BODY, CHASSIS AND HULL ACCESSORY ITEMS MAINTENANCE 14-4. Front Wiper (Lower). (Sheet 7 of 7) INSTALLATION 12. Install lockwasher (22) and nut (21, Figure 14-3). NOTE Turn wiper switch on. Turn disconnect switch on and off as needed so that bolts are exposed. 13. Install three lockwashers (20) and bolts (19). 14. Install new gasket (18), cover (17) and four screws (16) in lower wiper area of exterior of cab. 15. Install two new gaskets (15), spring washers (14), flat washers (13), snap rings (12), washers (11), nuts (10), caps (9) and drivers (8) on two shafts of linkage (34). 16. Install two clips (6), blades (5), screws (4) and lock nuts (3) on arm assembly (7). 17. Install items 7 thru 3 as an assembly (Figure 14-2) in same position as removed. 18. Install two lockwashers (2) and nuts (1). NOTE Return 130G Grader to original equipment condition. Figure 14-3. Figure 14-2. End of Task 14-13

Privacy Statement
Press Release
Contact