REMOVAL - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
856

TM 5-3805-261-20 BODY, CHASSIS AND HULL ACCESSORY ITEMS MAINTENANCE. 14-4. Front Wiper (Lower). (Sheet 3 of 7) REMOVAL 8. Disconnect ground cables from batteries. Refer to paragraph 7-112. 9. Remove four screws (23) and cover (24, Figure 14-4) in front of steering column in interior of cab. NOTE All wire, cable and harness assemblies must be tagged before disconnecting to aid in installation. 10. Disconnect three wire assemblies (25) at terminals. 11. Remove wiper motor (26) and washer (27). If necessary, use a screwdriver to separate arm (45) from shaft of wiper motor (26). Do not damage threads of shaft on wiper motor (26). 12. Remove four screws (28) and lockwashers (29). Hold flange (30) and gasket (31) while removing four screws (28). Open lower windshield if necessary. 13. Remove flange (30) and gasket (31). Discard gasket (31). Remove all gasket material from mounting surfaces. Figure 14-4. Go to Sheet 4 14-9

Privacy Statement
Press Release
Contact