TM 5-3805-261-20
WIRING HARNESS MAINTENANCE.
7-117.
General Repair. (Sheet 12 of 15)
(8)
Multi-wire connector, hard shell.
DISASSEMBLY
1.
Loosen two screws until wire is free to
rotate within strain relief.
2.
Remove and discard terminal assembly
(Figure
7-198)
from
shell.
Rotate
counterclockwise.
NOTE
All wires must be tagged upon
removal from terminals to aid in
installation.
3.
Cut wires close to terminals. Remove and
discard terminals.
4.
Remove and discard shell from wires.
Figure 7-198
Go to Sheet 13
7-303
