TM 5-3805-261-20
WIRING HARNESS MAINTENANCE.
7-117.
General Repair. (Sheet 14 of 15)
(9)
Multi-wire connector, compression-type.
DISASSEMBLY
1.
Loosen compression nut (Figure 7-199)
from
shell
assembly;
rotate
counterclockwise.
2.
Slide compression nut and spanner nut up
on wire to expose pin and socket terminals.
NOTE
All wires must be tagged before
disconnecting to aid in installation.
Each tag must also indicate if the
wire is connected to a pin-type
terminal or a socket-type terminal.
3.
Remove and discard terminals. Cut wires
close to terminals.
4.
Remove
and
discard
shell
assembly,
spanner nut and compression nut.
Figure 7-199
Go to Sheet 15
7-305
