TM 5-3805-261-20
WIRING HARNESS MAINTENANCE. (cont)
7-117.
General Repair. (Sheet 15 of 15)
(9)
Multi-wire connector, compression-type. (cont)
ASSEMBLY
1.
Slide new shell assembly onto wire (Figure
7-199).
2.
Slide new compression nut onto wire.
3.
Slide new spanner nut onto wire.
4.
Strip wires, refer to chart (Figure 7-191).
Do not cut or nick wire strands.
5.
Tin bare wires (Figure 7-199). Use resin-
core solder to coat bare wires. If using
solid core solder, clean wires with flux
before tinning.
6.
Insert wires into connector pins or socket
wells as indicated on tags.
7.
Secure wire and new terminal to prevent
movement. Use solder sparingly.
NOTE
Return 130G Grader to original
equipment condition.
Figure 7-199
Figure 7-191
End of Task
7-306
