TM 5-3805-261-20
WIRING HARNESS MAINTENANCE. (cont)
7-118.
Alternator Ground Lead. (Sheet 2 of 3)
REMOVAL
1.
Remove screw (1) and lockwashers (2 and
3, Figure 7-200) from alternator.
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
2.
Disconnect wire assembly (11) at terminal
from alternator.
3.
Remove lockwasher (4) and capacitor (5).
4.
Remove lockwasher (6).
5.
Remove nut (7), lockwasher (8), washer (9)
and bolt (10) from fan drive support.
6.
Remove wire assembly (11) from fan drive
support.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-200
Go to Sheet 3
7-308
