TM 5-3805-261-20
WIRING HARNESS MAINTENANCE.
7-117.
General Repair. (Sheet 4 of 15)
(3)
Terminal-type connector, pin and socket.
DISASSEMBLY
1.
Slide shell (3) back on wire (4, Figure 7-
193) to expose metal parts.
2.
Remove C-washer (1).
3.
Remove and discard terminal (2). Cut wire
(4) close to terminal.
4.
Remove shell (3).
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-193
Go to Sheet 5
7-295
