TM 5-3805-261-20
HORN AND BACK-UP ALARM MAINTENANCE.
7-104.
Back-up Alarm. (Sheet 2 of 3)
REMOVAL
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
1.
Disconnect two wire assemblies (3, Figure
7-156) at connectors from wiring harness
on radiator.
2.
Remove two lock nuts (1) and washers (2)
from alarm (6).
3.
Remove two wire assemblies (3) from
alarm (6).
4.
Remove two bolts (4), washers (5) and
alarm (6).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-156
Go to Sheet 3
7-253
