TM 5-3805-261-20
FUSE BOX TROUBLESHOOTING AND MAINTENANCE PROCEDURES. (cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
c.
FUSES WILL NOT STAY IN FUSE BOX.
Step 1. Check fuses.
If the fuses are distorted, damaged or defective--replace. Refer to paragraph 7-62.
Step 2. Check fuse box brackets.
If the brackets are distorted or broken--replace. Refer to paragraph 7-62.
d.
FLASHER WILL NOT OPERATE.
Test the continuity of the flasher unit. Connect one lead on multimeter to flasher unit and one lead to ground.
If the multimeter needle does not move, the circuit does not have continuity. Replace flasher unit. Refer to
paragraph 7-60.
7-140