TM 5-3805-261-20
ELECTRICAL SYSTEM MAINTENANCE. (cont)
7-55.
Blade Float Limit Switch. (Sheet 3 of 3)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Connect two wire assemblies (11,
Figure 7-74) to switch (12) on front lower
left cab.
2.
Tighten two screws (10).
3.
Install new gasket (9), plate (8) and two
screws (7).
4.
Install clip (6).
5.
Install items 12 thru 6 as an assembly, two
bolts (5), lockwashers (4) and nuts (3,
Figure 7-73).
6.
Install spring (2).
7.
Install clip (1) on plate.
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 7-74
Figure 7-73
End of Task
7-136
