TM 5-3805-261-20
FUSE BOX MAINTENANCE.
7-60.
Flasher Unit. (Sheet 2 of 2)
REMOVAL
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
1.
Disconnect wire assemblies (1 and 2) from
flasher unit (6, Figure 7-77).
2.
Remove two nuts (3), lockwashers (4),
screws (5) and flasher unit (6) from fuse
box (7).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install flasher unit (6), two screws (5),
lockwashers (4) and nuts (3) in fuse box (7,
Figure 7-77).
2.
Connect wire assemblies (2 and 1) to
flasher unit (6).
NOTE
Return
130C
Grader
to
original
equipment condition.
Figure 7-77
End of Task
7-143
