TM 5-3805-261-20
FUSE BOX MAINTENANCE.
7-61.
Circuit Breaker. (Sheet 2 of 2)
REMOVAL
1.
Remove two nuts (1) from circuit breaker
(5, Figure 7-78).
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
2.
Disconnect
wire
assemblies
(2)
at
terminals.
3
Remove two screws (3), lockwashers (4)
and circuit breaker (5) from fuse box (6).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Position circuit breaker (5) in fuse box (6,
Figure 7-78).
2.
Install two lockwashers (4) and screws (3).
3.
Connect
two
wire
assemblies
(2)
at
terminals to circuit breaker (5).
4.
Install two nuts (1).
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 7-78
End of Task
7-145
