REMOVAL - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
190

TM 5-3805-261-20 FUEL SYSTEM MAINTENANCE. (cont) 6-26. Secondary Fuel Filter and Mounting. (Sheet 2 of 5) REMOVAL NOTE All hose and tube assemblies must be tagged before disconnecting to aid in installation. Cap all hose and tube ends and plug all open fuel ports to prevent contamination. 1. Turn valve on lower right side of fuel tank clockwise to shut off fuel. 2. Remove and discard filter (5). 3. Disconnect tube assembly (1, Figure 6-71) from rear, right side of engine. 4. Loosen elbow (3) from base. 5. Remove elbow (2) from elbow (3). 6. Remove elbow (3) and preformed packing (4). Discard preformed packing (4). 7. Remove two bolts (6) and washers (7, Figure 6-72). 8. Remove items 9 thru 13 as an assembly and gasket (8). Discard gasket (8). Remove all gasket material from mounting surfaces. 9. Remove plug (9) and preformed packing (10, Figure 6-73) from items 11 thru 13 as an assembly. Discard preformed packing (10). Go to Sheet 3 Figure 6-71 Figure 6-72 Figure 6-73 6-98

Privacy Statement
Press Release
Contact