TM 5-3805-261-20
FUEL SYSTEM MAINTENANCE.
6-25.
Primary Fuel Filter/Priming Pump and Mounting. (Sheet 4 of 5)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Position new gasket (27) and priming pump
(26) on base (28, Figure 6-69).
2.
Install washer (25), bolt (24), washer (23)
and bolt (22).
3.
Install new preformed packing (21) and nut
(20).
4.
Install ring (19) in groove of nut (20).
5.
Install spring (18) and retainer (17, Figure
6-68).
6.
Compress spring (18) pressing on retainer
(17).
7.
Install ring (16) in groove of case (13) stub.
8.
Install new gasket (15) in case (13).
9.
Install new element (14) in case (13).
Go to Sheet 5
6-95
