TM 5-3805-261-20
FUEL SYSTEM MAINTENANCE. (cont)
6-25.
Primary Fuel Filter/Priming Pump and Mounting. (Sheet 3 of 5)
REMOVAL (cont)
5.
Remove elbow (3), connector (4) and
preformed packing (5). Discard preformed
packing (5).
6.
Disconnect hose assembly (6).
7.
Remove two bolts (11) and washers (12).
8.
Remove items 13 thru 28 as an assembly
(Figure 6-67) from front, right side of fuel
tank.
9.
Drain fuel left in filter into pan.
10.
Remove elbow (7), preformed packing (8),
adapter (9) and preformed packing (10).
Discard preformed packings (8 and 10).
11.
Remove and discard element (14) and
gasket (15) from case (13). Remove all
gasket material from mounting surfaces.
12.
Compress spring (13) pressing on retainer
(17).
13.
Remove ring (16).
14.
Remove retainer (17) and spring (18).
15.
Remove ring (19) from nut (20), Figure 6-
69).
16.
Remove nut (20) and preformed packing
(21). Discard preformed packing (21).
17.
Remove bolts (22), washer (23), bolt (24)
and washer (25).
18.
Separate priming pump (26) and gasket
(27) from base (28). Discard gasket (27).
Remove all gasket material from mounting
surfaces.
Figure 6-67.
Figure 6-68.
Figure 6-69.
Go to Sheet 4
6-94
