TM 5-3805-261-20
FUEL SYSTEM MAINTENANCE.
6-26.
Secondary Fuel Filter and Mounting. (Sheet 3 of 5)
REMOVAL
10.
Remove plug (11, Figure 6-74).
NOTE
Remove
stud
only
if
inspection
indicates replacement is necessary.
11.
Remove stud (12), if necessary from base
(13).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Coat threads of stud (12) with thread
sealant and install in base (13, Figure 6-75),
if removed. Tighten stud (12) to 50 ft-lb
torque.
2.
Install plug (11).
3.
Install new preformed packing (10) and plug
(9)to items 11 thru 13 as an assembly.
4.
Install new gasket (8) and items 13 thru 9
as an assembly (Figure 6-76).
Figure 6-74.
Figure 6-75.
Figure 6-76.
Go to Sheet 4
6-99
