TM 5-3805-261-20
FUEL SYSTEM MAINTENANCE.
6-20.
Turbocharger. (Sheet 2 of 3)
REMOVAL
1.
Remove three nuts (1), bolts (2), bolt (3)
and nut (4, Figure 6-50).
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends and plug all open hydraulic
ports to prevent contamination.
2.
Remove turbocharger (5) and gasket (6).
Discard gasket (6). Remove all gasket
material from mounting surfaces.
3.
Remove two clamps (7) and hose (8) from
elbow (9, Figure 6-51).
4.
Remove two clamps (10) and hose (11)
from pipe (12).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Go to Sheet 3
Figure 6-49.
Figure 6-50.
Figure 6-51.
6-71
