TM 5-3805-261-20
FUEL SYSTEM MAINTENANCE. (cont)
6-21.
Turbocharger Exhaust Elbow. (Sheet 2 of 2)
REMOVAL
1.
Remove three nuts (1), two bolts (2) and
bolt (3, Figure 6-52) from upper, right side
of engine.
2.
Remove elbow (4) from turbocharger.
3.
Remove ring (5), coupling (6) and ring (7)
from turbocharger.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install ring (7), coupling (6) and ring (5,
Figure 6-52) in turbocharger.
2.
Install elbow (4) on turbocharger.
3.
Coat threads of bolt (3) and two bolts (2)
with anti-seize compound.
4.
Install bolt (3), two bolts (2) and three nuts
(1). Tighten bolt (3) and two bolts (2) to 32
ft-lb torque.
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 6-52.
End of Task
6-74