TM 5-3805-261-20
FUEL SYSTEM MAINTENANCE. (cont)
6-22.
Fuel Tank Hoses, Lines and Fittings. (Sheet 2 of 6)
REMOVAL
WARNING
FUEL UNDER PRESSURE
Wear safety goggles to protect eyes
when disconnecting fuel lines. If fuel
makes contact with eyes or skin,
flush with large amounts of cold
water
and
seek
medical
aid
immediately.
1.
Remove nut (1), washer (2), bolt (3),
washer (4) and two clips (5) from tube
assembly (6, Figure
6-53).
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends and plug all open fuel
ports to prevent contamination.
2.
Remove tube assembly (6).
3.
Disconnect hose assembly (20) from elbow
(9).
4.
Remove elbow (7), preformed packing (8),
elbow (9) and preformed packing (10,
Figure 6-54). Discard preformed packings
(8 and 10).
5.
Disconnect hose assembly (23) from elbow
(11).
6.
Remove elbow (11) and preformed packing
(12) from fuel transfer pump. Discard
preformed packing (12).
Figure 6-53.
Figure 6-54.
Go to Sheet 3
6-76
