TM 5-3805-261-20
FUEL SYSTEM MAINTENANCE.
6-19.
Turbocharger Air Lines. (Sheet 2 of 4)
REMOVAL
1.
Remove bolt (1, Figure 6-47) from top,
left side of engine.
2.
Remove clamp (2) from elbow (5).
3.
Remove three bolts (3).
WARNING
Use adequate hoist and sling to
perform this task. Failure to do so
may cause INJURY. If you are
injured,
seek
medical
aid
immediately.
4.
Support air cleaner using wood blocks
or suspend with hoist and sling.
5.
Remove three bolts (4).
6.
Loosen two clamps (7).
7.
Remove elbow (5) from turbocharger.
8.
Remove
and
discard
gasket
(6).
Remove all gasket material from
mounting surfaces.
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends to prevent contamination.
9.
Remove two clamps (7) and hose (8).
10.
Remove plug (9) from elbow (5).
Figure 6-47.
Go to Sheet 3
6-67
