REMOVAL (cont.) - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
160

TM 5-3805-261-20 FUEL SYSTEM MAINTENANCE. (cont.) 6-19. Turbocharger Air Lines. (Sheet 3 of 4) REMOVAL (cont.) 11. Remove six nuts (10, Figure 6-48) from right side of air cleaner. 12. Loosen two clamps (13). 13. Remove pipe (11) and gasket (12) from turbocharger. Discard gasket (12). Remove all gasket material from mounting surfaces. 14. Remove two clamps (13) and hose (14). CLEANING Clean all parts. Refer to Chapter 2. INSPECTION Inspect all parts. Refer to Chapter 2. INSTALLATION 1. Install hose (14, Figure 6-48) in turbocharger. 2. Install two clamps (13). 3. Install new gasket (12) and pipe (11) on air cleaner. 4. Install six nuts (10). Tighten six nuts (10) to 20 ft-lb torque. 5. Tighten two clamps (13). Figure 6-48. Go to Sheet 4 6-68

Privacy Statement
Press Release
Contact