TM 5-3805-261-20
ENGINE MAINTENANCE.
6-7.
Oil Filler and Cap. (Sheet 2 of 3)
REMOVAL
1.
Open left side engine door.
2.
Remove two bolts (1), washers (2) and
clip (3, Figure 6-14) from front, left
side of engine.
3.
Remove items 5 thru 8 as an assembly
(Figure 6-15) from engine front cover.
4.
Remove and discard gasket (4).
Remove all gasket material from
mounting surfaces.
NOTE
Remove rivet and washer only if
inspection indicates replacement is
necessary.
5.
If necessary, remove rivet (5) and
washer (6, Figure 6-16). Discard rivet
(5).
6.
Remove cap assembly (7) from pipe
(8).
Figure 6-14
Figure 6-15
Figure 6-16
Go to Sheet 3
6-23
