TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-32.
Hydraulic Oil Cooler. (Sheet 3 of 4)
REMOVAL (cont)
7.
Support core assembly (12, Figure 15-155).
8.
Remove two bolts (10) and washers (11).
9.
Remove core assembly (12).
NOTE
Remove
seal
only
if
inspection
indicates replacement is necessary.
10.
Remove and discard seal (13) on front of
radiator, if necessary. Remove all old seal
material from mounting surfaces.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 15-155.
Go to Sheet 4
15-178
