TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-33.
Hydraulic Tank Filters. (Sheet 3 of 4)
REMOVAL (cont)
4.
Remove and discard preformed packing (9,
Figure 15-158).
5.
Remove screen (10) and tube (11).
6.
Remove and discard preformed packing
(12).
7.
Remove and discard ring (13).
8.
Remove strainer (14) from neck of tank
(15).
NOTE
Do not disassemble cover unless
inspection indicates it is necessary.
9.
Remove ring (16), gasket (17), plate (18),
ball (19) and cap (20) from cover (1, Figure
15-159).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install cap (20), ball (19), plate (18), gasket
(17) and ring (16) to cover (1, Figure 15-
159).
2.
Install strainer (14) and new ring (13) on
neck of tank (15, Figure 15-158).
3.
Install new preformed packing (12), tube
(11), screen (10) and new preformed
packing (9).
Figure 15-158.
Figure 15-159.
Go to Sheet 4
15-182
