TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-32.
Hydraulic Oil Cooler. (Sheet 4 of 4)
INSTALLATION
1.
Install new seal (13, Figure 15-155) to front
radiator, if removed. Cut bulk seal to size.
Remove adhesive covering and apply on
clean, cool radiator surface.
2.
Position core assembly (12) on radiator.
3.
Install two washers (11) and bolts (10).
4.
Install two washers (9) and new bolts (8,
Figure 15-156) through vehicle rear signal
light cut-outs in radiator grille, if removed.
5.
Install two brackets (7), washers (6) and
nuts (5, Figure 15-155).
6.
Install two new preformed packings (4) and
connectors (3).
7.
Connect two hose assemblies (2) to left and
right front core assembly (12).
8.
Refill hydraulic system reservoir to correct
level. Refer to LO 5-3805-261-12.
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 15-156.
End of Task
15-179
