TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-31.
Scarifier Lines, Fittings and Hoses. (Sheet 3 of 5)
REMOVAL
4.
Remove two hose assemblies (5, Figure 15-
153) from scarifier check and relief valve.
5.
Remove two elbows (6) and preformed
packings (7) from check and relief valve on
scarifier. Discard two preformed packings
(7).
6.
Disconnect hose assemblies (11 and 12).
7.
Remove two connectors (8) and preformed
packings (9). Discard two preformed
packings (9).
8.
Remove and discard tie strap (10, Figure 15-
154) from scarifier hydraulic cylinder on
center, front frame.
9.
Remove hose assemblies (11 and 12) on
scarifier hydraulic cylinder.
10. Remove connector (13) and preformed
packing (14). Discard preformed packing
(14).
11. Remove elbow (15) and preformed packing
(16). Discard preformed packing (16).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 15-153.
Figure 15-154.
Go to Sheet 4
15-173
