TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-31. Scarifier Lines, Fittings and Hoses. (Sheet 2 of 5)
REMOVAL
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends and plug all open hydraulic
ports to prevent contamination.
1.
Disconnect two hose assemblies (5, Figure
15-150) from right hand control valve on
right side of front cab.
2.
Remove two connectors (1) and preformed
packings (2, Figure 15-151). Discard two
preformed packings (2).
3.
Remove bolt (3) and clip (4, Figure 15-152)
from right side center, front frame.
Figure 15-150.
Figure 15-151.
Figure 15-152.
Go to Sheet 3
15-172