TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-29.
Articulation Lines, Fittings and Hoses. (Sheet 6 of 7)
INSTALLATION
14.
Install new preformed packing (10), elbow
(9), new preformed packing (8) and elbow
(7) td articulation check valve (45, Figure
15-132).
15.
Install hose assemblies (6 and 5).
16.
Install new preformed packing (4), elbow
(3), new preformed packing (2) and elbow
(1) to right control valve group (inner most
valve) under right side of cab.
17.
Connect hose assemblies (6 and 5).
WARNING
Only
a
qualified
operator
may
perform the next procedure. All other
personnel must clear the immediate
area. Failure to follow this procedure
may cause INJURY. If you are
injured,
seek
medical
aid
immediately.
CAUTION
Blade and scarifier teeth must be in
raised
position
and
differential
unlocked
before
vehicle
can
be
articulated.
18.
Start engine. Refer to TM 5- 3805-261-10.
19.
Articulate vehicle slowly left and right. Move
system through at least five full movements
of travel to bleed air from system.
Figure 15-132.
Go to Sheet 7
15-161
