TM 5-3805-261-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0011 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TRANSMISSION
Shut down engine and move shift
Start engine. If problem still
1.
Machine Moves, as in Gear, When Shift
Lever Is in Neutral (N) Position.
lever through all forward gears
exists, notify Unit Maintenance.
NOTE
2.
Slow or Erratic Transmission Engagement.
Before checking oil level, ensure that machine is parked on
level ground, parking brake applied, transmission in N (Neu-
tral), oil warm, engine at low idle, and blade lowered with slight
downward pressure applied.
Check transmission oil level.
If transmission oil is low, fill to
problem still exists, notify Unit
Maintenance.
NOTE
3.
Transmission Does Not Operate in Any
Gear.
Before checking oil level, ensure that machine is parked on
level ground, parking brake applied, transmission in N (Neu-
tral), oil warm, engine at low idle, and blade lowered with slight
downward pressure applied.
Check transmission oil level (WP
If transmission oil is low, fill to
problem still exists, notify Unit
Maintenance.
Check position of parking/
Disengage parking/emergency
4.
Transmission Cannot Be Shifted Out of
emergency brake lever.
brake lever if required. If problem
Neutral.
still exists, notify Unit Maint-
enance.
1. Check transmission oil level
If transmission oil is low, fill to
5.
Transmission Does Not Shift from One
Gear to Another.
problem still exists, go to test step
2.
2. Control linkage out of
Notify Unit Maintenance.
adjustment.
Possible internal failure.
Notify Unit Maintenance.
6.
Transmission Engages, but Machine Does
Not Move; Engine Stops Running.
END OF WORK PACKAGE