TM 5-3805-261-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
.
LOCATION
ITEM TO
ITEM
MAN-
CHECK/
NOT FULLY MISSION
NO.
INTERVAL
HOURS
SERVICE
PROCEDURE
CAPABLE IF:
NOTE
Review all WARNINGs, CAUTIONs, and NOTEs before
performing PMCS and operating the machine.
Perform all PMCS checks if:
a. You are the assigned operator but have not operated the
machine since the last weekly checks.
b. You are operating the machine for the first time.
Unless otherwise indicated, perform PMCS with machine
parked on level ground, parking brake applied, transmission in N
(Neutral), blade lowered to the ground, wheels blocked, and
engine shut down.
If leakage is detected during performance of PMCS, further
investigation is required to determine location and cause of leak.
Walk around machine and look for any obvious leaks or dam-
age.
During walk around, also visually check tires for low infla-
tion, damage, and debris.
LEFT SIDE
AND REAR
Overall View Check left front side of machine for Class III leaks or damage that
1
Before
evidence of leakage or damage.
would impair operation are
evident.
Check left front work light, head- Missing or damaged compo-
2
Before
Lights
lights, front turn signal lights, and nents if necessary for mission.
blackout light for missing or damaged
components.
Check hoses, cables, and connections Class III leaks or damage that
3
Before
Below
below left side of operator compart- would impair operation.
Operator
ment for damage or leaks.
Compart-
ment
