TM 5-3805-293-23-5
0348
HOW ADAPTERS AFFECT TORQUE LIMITS CONTINUED
000348
For example:
A 6-inch extension is used on an 18-inch torque wrench. The required torque is 300 lb-ft (407 Nm).
Using the formula, the torque wrench setting can be determined:
Figure 6. Torque Calculation Example.
0348
Therefore, a torque wrench setting of 225 lb-ft (305 Nm) will result in the required torque of 300 lb-ft (407 Nm).
HOW TO USE TORQUE TABLES
000348
Figure 7. Measuring a Bolt.
0348
1. Measure the diameter of the bolt you are installing.
N OT E
Threads-per-inch measurement applies to SAE standard fasteners only (Table 1).
2. Count the number of threads per inch or use a pitch gauge.
3. Look down the left column and find the diameter and number of threads per inch of the bolt you are installing.
4. Find the torque value for the grade of bolt you are installing.
