TM 5-3805-293-23-5
0325
REMOVAL CONTINUED
N OT E
When removing drawbar, shaft will slide out of front bracket.
3. Remove nut (Figure 2, Item 4), washer (Figure 2, Item 3), bolt (Figure 2, Item 2), collar (Figure 2, Item 5), and
drawbar arm (Figure 2, Item 1) from drawbar shaft (Figure 2, Item 6).
Figure 2. Drawbar Collar.
0325
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting device used is in good condition and
of suitable load capacity. Keep clear of heavy parts supported only by lifting device.
Failure to follow this warning may result in injury or death to personnel.
N OT E
Each drawbar weighs 500 lb (225 kg).
4. Using lifting device, remove drawbar (Figure 2, Item 1) from machine and lower onto a flat surface.
5. Remove lifting device and sling from drawbar.
6. Repeat steps 1 through 5 for left drawbar arm.