TM 5-3805-293-23-5
0312
REMOVAL CONTINUED
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may cause injury to personnel.
N OT E
Tag and mark hoses to aid in installation.
Cap and plug all lines and fittingsat removal to prevent contamination.
22. Disconnect hose (Figure 7, Item 5) from tube (Figure 7, Item 3) and remove O-ring (Figure 7, Item 4). Discard
O-ring. Remove hose from machine.
23. Disconnect tube (Figure 7, Item 3) from front valve (Figure 7, Item 1) and remove O-ring (Figure 7, Item 2).
Discard O-ring.
24. Disconnect hose (Figure 7, Item 6) from tube (Figure 7, Item 8) and remove O-ring (Figure 7, Item 7). Discard
O-ring. Remove hose from machine.
25. Disconnect tube (Figure 7, Item 8) from front valve (Figure 7, Item 1) and remove O-ring (Figure 7, Item 9).
Discard O-ring.
Figure 7. Front Valve.
0312
END OF TASK
CLEANING AND INSPECTION
000312
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK