TM 5-3805-293-23-5
0299
REMOVAL CONTINUED
10. Remove two bolts (Figure 5, Item 4), washers (Figure 5, Item 3), lock (Figure 5, Item 5), and ball stud
(Figure 5, Item 2) from left blade lift arm (Figure 5, Item 1).
Figure 5. Left Blade Lift Arm Ball Stud.
0299
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Centershift bar weighs 170 lb (77 kg).
11. Using lifting device, remove centershift bar from machine and lower onto a flat surface.
12. Remove lifting device and sling from centershift bar.
END OF TASK
CLEANING AND INSPECTION
000299
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
