TM 5-3805-293-23-5
0296
REMOVAL CONTINUED
16. Remove A/C line (Figure 8, Item 2) and O-ring (Figure 8, Item 12) from bulkhead fitting (Figure 8, Item 11).
Discard O-ring.
17. Remove A/C line (Figure 8, Item 2) and O-ring (Figure 8, Item 1) from receiver/dryer (Figure 8, Item 17).
Discard O-ring.
18. Remove bolt (Figure 8, Item 3), washer (Figure 8, Item 4), and clamp (Figure 8, Item 5) from cab.
19. Remove A/C line (Figure 8, Item 8) and O-ring (Figure 8, Item 10) from bulkhead fitting (Figure 8, Item 9).
Discard O-ring.
20. Remove A/C line (Figure 8, Item 8) and O-ring (Figure 8, Item 7) from accumulator (Figure 8, Item 6). Discard
O-ring.
21. Remove two bolts (Figure 8, Item 13), washers (Figure 8, Item 14), and accumulator (Figure 8, Item 6) from
cab.
22. Remove bolt (Figure 8, Item 15), washer (Figure 8, Item 16), and receiver/dryer (Figure 8, Item 17) from cab.
Figure 8. A/C Accumulator and Receiver/Dryer.
0296
END OF TASK
CLEANING AND INSPECTION
000296
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK