TM 5-3805-293-23-5
0287
REMOVAL CONTINUED
000287
N OT E
Tag and mark lines and wiresto aid in installation.
Plug and cap lines to prevent fluid loss and contamination.
2. Remove five brake lines (Figure 2, Item 3) and O-rings (Figure 2, Item 2) from brake control valve (Figure 2,
Item 1). Discard O-rings.
3. Remove two bolts (Figure 2, Item 6), washers (Figure 2, Item 5), and brake control valve (Figure 2, Item 1)
from service brake control (Figure 2, Item 4).
Figure 2. Brake Control Valve.
0287
END OF TASK