TM 5-3805-293-23-5
0281
DISASSEMBLY
000281
N OT E
The procedure for vent disassembly is identical for all vents. Left air duct is shown in this
procedure.
1. Remove two screws (Figure 11, Item 1) and vent (Figure 11, Item 2) from air duct (Figure 11, Item 3).
2. Remove vent (Figure 11, Item 4) from air duct (Figure 11, Item 3).
Figure 11. Vent.
0281
END OF TASK
CLEANING AND INSPECTION
000281
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
ASSEMBLY
000281
N OT E
The procedure for vent assembly is identical for all vents. Left air duct is shown in this
procedure.
1. Install vent (Figure 11, Item 4) in air duct (Figure 11, Item 3).
2. Install vent (Figure 11, Item 2) and two screws (Figure 11, Item 1) in air duct (Figure 11, Item 3).
END OF TASK