TM 5-3805-293-23-4
0247
INSTALLATION CONTINUED
000247
N OT E
Install lines as tagged during removal.
Loosely install all tubes, and hand-tighten bots until tubes are fully installed on valves.
l
Loosening of fittings may be required to align tubes.
10. Install new O-ring (Figure 6, Item 5) and connect tube (Figure 6, Item 4) to tee (Figure 6, Item 6).
11. Install new O-ring (Figure 6, Item 2) and connect tube (Figure 6, Item 3) to rear valve (Figure 6, Item 1).
12. Tighten all loosely installed tubes and bolts.
Figure 6. Left-Side Rear Valve.
0247
END OF TASK
FOLLOW-ON TASKS
000247
1. Remove hydraulic system vacuum cap (WP 0221).
2. Remove articulation lock pin (TM 5-3805-293-10).
END OF TASK
END OF WORK PACKAGE