TM 5-3805-293-23-4
0247
INSTALLATION CONTINUED
000247
N OT E
Install lines as tagged during removal.
Loosely install all tubes, and hand-tighten bots until tubes are fully installed on valves.
l
Loosening of fittings may be required to align tubes.
7. Install new O-ring (Figure 5, Item 4) and connect tube (Figure 5, Item 5) to manifold (Figure 5, Item 3).
8. Install new O-ring (Figure 5, Item 2) and connect tube (Figure 5, Item 1) to elbow on manifold (Figure 5,
Item 3).
9. Tighten all loosely installed tubes and bolts.
Figure 5. Left-Side Manifold.
0247